This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ27742-G1: SOC jump issue

Part Number: BQ27742-G1

Hello Sir:

Please refer our gg file as below.

Especially these parameters terminate voltage, reserve capacity, load select, term voltage, dsg current threshold, quit current threshold and dsg relax time. 

Sample C gg (20230206).gg.csv

 And please also refer our discharging profile as below.

We connected the electronic load and followed our discharging profile to discharge until the SOC become to zero.

But we found after soc under 5% which has jump issues.

Please refer our log file for detail.

Sample C log (20230207).log 

Please kindly provide your recommendations for us.

Looking forward your feedback.

Thanks a lot.