Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 147 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CSD23203W: The use of CSD23203

Hale Tan
Expert 3220 points
Part Number: CSD23203W

Hi Team!

The customer used an mcu to control CSD23203 and found that the GPIO voltage which controlled the gate of CSD23303 dropped to about1V. And they tested the current of gate which was 1A. 

I wanted to do a simulation to test the current of gate, but I am no familiar with the PSPICE. Could you share a simulation file which can shows the current of the gate. And did you have any comments about this phenomenon?