• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 60 subscribers
  • Views 44 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ28Z610-R1: BQ28Z610-R1 communications issue

Star Xu
Expert 6875 points
Part Number: BQ28Z610-R1
Other Parts Discussed in Thread: BQ28Z610

Hi

I have a query need your help.

The bq28z610-r1 communication port is given a pull-up voltage.

When there is no communication with the system, the chip actively sends the waveform signal in the below figure. The time interval of the signal is 1S-14S-1S-14S.

Why does this signal appear? Can it be eliminated?

Waiting for your reply.

Thanks

Star