LM61460: Simulation model

Kevin-Mingdong.Liu

Part Number: LM61460
Other Parts Discussed in Thread: PSPICE-FOR-TI

Hi,

Here a project using LM61460, I am doing some simulation with this chip and its filter. I can't find the simulation model of this chip.

Could you help provide it ?

over 1 year ago

0 Jimmy Hua over 1 year ago

TI__Guru 50120 points

Hello,

For simulation, please refer to the device product folder. In the Design tools & simulation section, there are PSPICE transient models for you to simulate the IC using PSPICE-FOR-TI.

Regards,

Jimmy

0 Kevin-Mingdong.Liu over 1 year ago in reply to Jimmy Hua

Intellectual 270 points

Hi Jimmy Hua

I checked that there are average model for pispice,I want to simulate it with filter before this buck in simetrix/simplis.

Is there average model of simetrix/simplis or unencryted type ？

+1 Jimmy Hua over 1 year ago in reply to Kevin-Mingdong.Liu

TI__Guru 50120 points

Hello,

Will the average model on PSPICE work for your intended simulation needs? Below is what you can find in the product folder.

If you still need the SIMPLIS model, attached is the encrypted file where you can run both AC and DC analysis.

LM61460_ADJ_simplified_encrypted_2022.sxsch

Hope that helps.

Regards,

Jimmy

0 Kevin-Mingdong.Liu over 1 year ago

Intellectual 270 points

TKS jimmy.

0 Jimmy Hua over 1 year ago in reply to Kevin-Mingdong.Liu

TI__Guru 50120 points

Thank you for using the E2E forum. I will close this thread now.

If you have any more questions please reply back to this thread and it will reopen for further assistance.

Power management

Power management forum

LM61460: Simulation model