what is needed to get all the adc reporting during charging. only the input voltage is being reported.
charging of two cells in series is working.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
what is needed to get all the adc reporting during charging. only the input voltage is being reported.
charging of two cells in series is working.
Hi John,
To read the ADC measurement, first step is to enable ADC by setting ADC_START bit 14 (ADC_Option register 0x3A).
Regards,
Tiger