LP38692-ADJ: Schematics Review

Desireddy Teja Reddy

Part Number: LP38692-ADJ

Hi Team,

We are using the LP38692SD-ADJ/NOPB LDO part in our schematics. We are using the same part in couple of instances, I had attached the schematic Images below, Kindly review the schematics and share your valuable feedback with us.

Thanks and Regards

- Teja

over 1 year ago

0 Erin Thibeault over 1 year ago

TI__Expert 6570 points

Hi Teja,

It looks like both schematics are configured per the datasheet. What voltage are you seeing on enable? I want to make sure that the voltage on enable is high enough to power the device? What current are you driving?

BR,

Erin

0 Desireddy Teja Reddy over 1 year ago in reply to Erin Thibeault

Intellectual 490 points

Hi Erin,

The Enable voltage we are using to power the device is 3.3V For both the cases.

The current we are driving are as follows:

U89 - 0.4A

U4 - 0.12A

Thanks and regards

- Teja

+1 Erin Thibeault over 1 year ago in reply to Desireddy Teja Reddy

TI__Expert 6570 points

Hi Teja,

Thanks! Everything looks good.

BR,

Erin

Power management

Power management forum

LP38692-ADJ: Schematics Review