Hi,
TIDU248 uses a center-tap synchronous rectification for the secondary. can you tell me what is the application of D4/D6 in the schematic? how does it work?
Best Regards
Toktam Khani
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
TIDU248 uses a center-tap synchronous rectification for the secondary. can you tell me what is the application of D4/D6 in the schematic? how does it work?
Best Regards
Toktam Khani
Hi Toktam,
It is a passive snubber to attenuate ringing on the SR MOSFET drains. When the SR FET drain voltage flies up at the turn off edge of the SR, the diodes provide a path for the leakage energy to be transferred into C1 and limit the max voltage stress seen by the SR FET.
Regards,
Chen