Hello,
We are testing the TPS25814EVM with a USB E-load to detect the Max power we can get out of the board and we are only seeing a Max Current of 1.5A. We followed the user manual and messed around with S1 to see any changes of output power, but no luck. We are also using a power supply that is supplying the 19-20V input.
According to the manual we would think the orientation of S1 should go as this…
S1a = Off
S1b = Off
S1c = Off
Are there any other settings you would recommend for us to change so we may get this 3A output?
Thank you, Keith