This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC12041-Q1: APWM when AIM is connected to reference COM

Part Number: UCC12041-Q1
Other Parts Discussed in Thread: UCC21750-Q1


I understood that, when AIN is > 0.6V, a PWM signal appears on the APWM output (The Duty cycle is the image of the voltage applied to the AIN input)

Could you please let me know what happen to the APWM output when AIN is < 0.6V?

Best regards,