Dear TI team,
Once the selected chemistry has been programmed, do we need to do any other changes in the registers for the gauge to correctly report the SOH and SOC?
I have performed the voltage and current calibration.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear TI team,
Once the selected chemistry has been programmed, do we need to do any other changes in the registers for the gauge to correctly report the SOH and SOC?
I have performed the voltage and current calibration.
Hello Prabhat,
The key gauging parameter configurations are listed in Section 2.3 Gas Gauging of the Using the bq78350-R1
Regards,
Jose Couso