TPSF12C1-Q1: PSPICE Simulation TINA or others

Thomas wentzlik

Part Number: TPSF12C1-Q1
Other Parts Discussed in Thread: TPSF12C1,

Dear TI support

one question to the TPSF12C1 PSIPCE model. Can this PSIPCE TPSF12C1-Q1.LIB work with other spice simulation tools like TINA or LTSPICE? Or is it restricted because of the encrytion?

Thanks

Thomas

11 months ago

0 Richard Fu22 11 months ago

TI__Genius 17630 points

Hi Thomas,

If you want to port it to LTSPICE, you will need to get an NDA for the unencrypted model to use for other SPICE simulators.

Thanks,

Richard

0 Timothy Hegarty 11 months ago in reply to Richard Fu22

TI__Mastermind 49597 points

Thomas,

We also have SIMPLIS models and the Excel quickstart calculator to assist with the design.

Regards,

Tim

0 Thomas wentzlik 11 months ago

Prodigy 30 points

Hi Richatd Hi Tim

Thanks for the feedback, the simplis model can work with a full version as I understood using simetrix/simples. We do not have one, we use Powesys and LTspice for the power electronic stuff.

Can we do an NDA as Richard sugested, this sounds with the Excel quickstart a good solution for me.?

Thanks

Thomas

0 Timothy Hegarty 11 months ago in reply to Thomas wentzlik

TI__Mastermind 49597 points

Hi Thomas,

I recommend getting in contact with a local TI FAE. We typically do not provide an unencrypted model or support for LTspice. The quickstart calculator is available in the product folder.

Regards,

Tim

0 Thomas wentzlik 11 months ago in reply to Timothy Hegarty

Prodigy 30 points

Hi Tim sure makes sense and I try to get contact to the FAE.

Thanks

Thomas

0 Timothy Hegarty 11 months ago in reply to Thomas wentzlik

TI__Mastermind 49597 points

Thank you, Thomas.

Power management

Power management forum

TPSF12C1-Q1: PSPICE Simulation TINA or others