BQ40Z80: programming issue

Yash Shah

Part Number: BQ40Z80
Other Parts Discussed in Thread: GPCCHEM

Hi,

I am working on BQ40z80 for labview VI. I have problem in programming the BQ and error message says that buffer size is too small to complete the operation. I took the reference of BQ40z50R1 for labview VI. Can you help me in this?

Can you send me file for BQ40z80 Data memory programming for mass production?

Thanks!!

over 1 year ago

0 Wyatt Keller over 1 year ago

TI__Guru** 103125 points

Hello Yash,

We have not release a Labview programming tool for our gauges, I will not be able to assist with Labview related questions.

We cannot provide the golden image for your mass production, you will need to start by finding the correct chem ID to upload to the gauge, you can use our GPCCHEM tool to find the chem ID, then run a learning cycle. At that point you can start configuring the gauge for your specific application needs. After it is configured you can export the flash stream or SREC file for mass programming.

You can find resources on our FAQ home page for the BQ40Z80: https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1127899/faq-bq40z80-faqs?tisearch=e2e-sitesearch&keymatch=faq%3Atrue

Sincerely,

Wyatt Keller

Power management

Power management forum

BQ40Z80: programming issue