CSD23382F4: Question about CSD23382F4

Jimmy Huang

Part Number: CSD23382F4

Hello：

My customer found CSD23382F4 broken after REL shock test.

The content of Shock test is to place the sample (PCBA) in the fixture and fix it. The device moves down with the fixture to give the sample (PCBA) an instant acceleration.

Could you please provide Rel test SPEC/condition of this chip for this FA? Thanks.

over 2 years ago

0 John Wallace1 over 2 years ago

TI__Mastermind 38390 points

Hello Jimmy,

Thanks for promoting TI FETs at your customer. I am going to send you two documents via private message. One is the qualification summary for the CSD23382F4 and the other is a report on board level mechanical stress testing done for the FemtoFET family of products. Please review these documents and let me know if you need any additional information.

Best Regards,

John Wallace

TI FET Applications

0 John Wallace1 over 2 years ago in reply to John Wallace1

TI__Mastermind 38390 points

Hello Jimmy,

I am going to close this thread. If you need further assistance, please respond via private message.

Thanks,

John

Power management

Power management forum

CSD23382F4: Question about CSD23382F4