TPS92633: How to program this to be active low?

Hi all,

My customer has their power supply on the anode, and wants to drive these LEDs from the cathode side. Can you advise in how this can be done via programming? It looks like it can be done, from this thread-

Their LED configuration looks very similar to this.

https://e2e.ti.com/support/tools/code-composer-studio-group/ccs/f/code-composer-studio-forum/1208611/how-to-change-led-s-status-as-active-low-in-ti_drivers_config?tisearch=e2e-sitesearch&keymatch=TPS92633%2520active%2520low#

Thanks!
Lauren