• State
  • Locked Locked
  • Replies 4 replies
  • Subscribers 62 subscribers
  • Views 332 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS61235P: TPS61235PRWLR: Enable Design

Elian Seda
Prodigy 30 points
Part Number: TPS61235P


Hello, 

I want to validate that the design for enabling the TPS61235PRWLR will not leak much voltage and will work properly. Going into the Vin pin with a 1M ohm resistor in series with a switch that when it is turned on it will go into the enable pin, otherwise it will go to ground. The image below shows the circuit.