• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 123 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ25628: PMID Output current

Hideki Hayashi1
Expert 7650 points
Part Number: BQ25628

Hi team,

Where can I find the output current limitation from PMID pin? From the below graph, 2A is maximum?

Regards,

Hayashi

  • 0
    TI__Mastermind 26645 points

    Hi Hayashi-san, 

    Yes 2A is the recommended maximum current when in OTG mode. Please note the device does not have a way to limit current on PMID output. The customer will need to ensure their load at PMID does not exceed the 2A maximum. 

    Best Regards,

    Garrett