• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 218 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ25892: Do we have ways to improve charging current while loading?

Nan Zhang
Intellectual 1895 points
Part Number: BQ25892

Hi team,

      It is clear that  BQ25892 can support 5A(the customer set the charging current)total between both battery and VSYS. So the charging current would be less than 5A  while the VSYS are having load. The customer want to know whether we have ways to improve the charging current to 5A while having load? Can we distribute the current(limit the Vsys to increase the charging current)?

YOURS

NAN

  • 0
    TI__Mastermind 31240 points

    Hi Nan, 

    Nan Zhang said:
    The customer want to know whether we have ways to improve the charging current to 5A while having load?

    The device can support a maximum of 5A shared between SYS load and battery. There is no way to increase the maximum allowable current of the buck converter. 

    Nan Zhang said:
    Can we distribute the current(limit the Vsys to increase the charging current)?

    The device is designed to prioritize supporting the SYS load. For example, even if ICHG is set to 5A if SYS draws 4A there is 1A available for battery charging. Customer would need to design their system to have low SYS current draw to maximize the available charge current. 

    Best Regards,

    Garrett