This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM3150: 1 pin VCC is shorted to 5 pin and 6 pin GND

Part Number: LM3150

Hi team,

2-V power supply, the output voltage should be 3.3 V at power up, but the actual output is around 0.8 V. The test found that 1-pin VCC was shorted to 5pin, 6-pin GND. This is not the case for all boards, some of boards have this issue.

Could you help check this case? Thanks.

Best Regards,

Cherry

  • Hello Cherry 

    Since the VCC is not connected to any other external circuit except the VCC capacitor, I think the VCC pin might be damaged by a wrong component population, a wrong connection, a sudden VIN short  or a mishandling. If you can duplicate the issue. Please check these items. 

    - EL