Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 64 subscribers
  • Views 154 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5170EVM-BIDIR: LM5170-EVM-BIDIR-3 PHASE CONFIGURATION

Muhammad Salman
Intellectual 260 points
Part Number: LM5170EVM-BIDIR
Other Parts Discussed in Thread: LM5170

Hello 

I have some confusions in connecting two EVM's for three phase Boost confuguraiton.

1. For the second board, do I also need the same jumpers setting?

2. If for example for testing purpose I want to operate for on-board voltage control without connecting to MCU so do I need to turn On the on-board voltage loop in second board?

3. And after connecting MCU I want to operate for 25KHz switching frequency while the board is running on 100KHz, so what I need to change in the components? If just resistors or should I have some more alternative?

Thank You