TPS563212: TPS563212：WEBENCH Simulation Fail

Mitsuhiro Tada

Prodigy 20 points

Part Number: TPS563212

I created a design for the TPS563212 in WEBENCH.

Vin:6V

Vout:0.6V/1A

I ran the simulation (Setup, Lod Transient), but it failed.

over 1 year ago

0 Zixu Wang over 1 year ago

TI__Expert 8100 points

Hi Mitsuhiro,

Could you please help to share your schematic and screen shot of reported error in Webench?

BRs

Zixu

0 Mitsuhiro Tada over 1 year ago in reply to Zixu Wang

Prodigy 20 points

0 Zixu Wang over 1 year ago in reply to Mitsuhiro Tada

TI__Expert 8100 points

Hi Mitsuhiro,

Perhaps there would be limitations in webench model. I have checked that 6Vin to 0.6Vout with 1A could be supported by TPS563212.

For webench issue, please contact webench team for solution.

BRs

Zixu

0 Mitsuhiro Tada over 1 year ago in reply to Zixu Wang

Prodigy 20 points

Hi Zuxu san

Thanks your advice.

How do I request this inquiry for webench team?

0 Zixu Wang over 1 year ago in reply to Mitsuhiro Tada

TI__Expert 8100 points

Hi Mitsuhiro san,

At the bottom of webench, the item of "send feedback" could be observed. Upon clicking on it, the new website for submitting e2e case of simulation and design tools could be found. You could try posting your question via this way.

BRs

Zixu

Power management

Power management forum

TPS563212: TPS563212：WEBENCH Simulation Fail