Other Parts Discussed in Thread: TPS566231,
Hello,
I would like to confirm what would be the value of Vout, when
1) Vin < 1.8V (for example, Vin = 1.1V)
2) EN is low.
I am expecting Vout = 0 V.
Is it correct?
And, according to Table 8-1 in datasheet, PG behavior under Vin 1.8V is not defined.
What does it mean? If i connect PG to Vout throught a 100K resistor, is PG also = 0 V under this condition?
Thank you.
/Roland