This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5118-Q1: Switching Wave form exceeding mosfet and diode maximum limits.

Part Number: LM5118-Q1

Hi team,

I have design a DC-DC converter using LM5118-Q1 IC with Specs Input range =12V-36V and output = 24V 3A.  the output is coming fine line regulation, load regulation and efficiency is also good.

but the MOSFET and Diode waveform are seems unsatisfactory peaks of some 10 - 20nS is going above the rated voltage of MOSFET and Diode. will it create any issues please suggest.

I am attaching the Schematic PDF and Test report with waveforms.

    24V 3A DC.docx