• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 145 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ25672EVM: MPPT register setting.

Paul Hoffmeyer
Prodigy 30 points
Part Number: BQ25672EVM
Other Parts Discussed in Thread: USB2ANY

Hi, 

I'm in the process of testing the BQ25672EVM with a solar panel input charging a 12.8V LiFePo4 battery.  I have the USB2ANY connected and would like to enable the MPPT algorithm.  Unfortunately the register that that bit resides in is showing up as Reserved and can not be changed.  How can I test with the MPPT active? 

Thanks, 

Paul 

  

  • 0
    TI__Guru*** 148795 points

    HI Paul,

    So sorry for this bug.  I have submitted a request to have this fixed.  You should be able to access the MPPT bits on the  tab

    If not, you can go to the command sequence page and enter those bytes directly.

    Regards,
    Jeff