Other Parts Discussed in Thread: TPS65987
Hi,
We are developing a Thunderbolt 3 board using TPS65983B.
The Thunderbolt reference is "Titan-Ridge DD - Tapex Creek TI83".
Please provide TPS65983B Configuration Tool.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
For Tapex Creek our recommended design is TPS65987DJ https://www.ti.com/product/TPS65987DDJ . Please consider using this device. Let us know if you need help accessing TPS65987DJ
Thank you for your answer.
We are developing Thunderbolt 3 device application.
The board was designed with reference to the "Tapex Creek Rev4v0.pdf" reference circuit using TPS65983B.
It is impossible to change parts to TPS65987 because PCB fabrication was completed and parts assembly was done.
Please review the support again.
Hi,
Have you applied for access to the GUI?
You can do that here: https://www.ti.com/licreg/docs/swlicexportcontrol.tsp?form_id=302387&prod_no=TBTDEVICE-DESIGN&ref_url=app_psil_pi
Please note that the recommendation is to always use the latest revision of a TBT reference design as Ghouse mentioned earlier.
Thank you,
Kevin
Hello, Kevin.
I downloaded the link material and installed the program.
However, TPS65983B could not be found in the program settings you installed, and it is not mentioned in the document.
Can I choose which parts to replace the TPS65983B device?
Hi,
Can you please reapply at the same link above?
I will make sure the team gives you access to the correct GUI as you will need the specific GUI for TPS65983B.
Thank you,
Kevin