This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ24610: Custom Board with power path but no DPM (not needed) - board seems to be stuck in sleep mode

Part Number: BQ24610


I have a custom board that uses the BQ24610 that does not utilized the DPM feature but does utilize the Power path feature. When I apply power to the board (Vin), the chip VREF is reading zero volts as if it was in sleep mode. I have attached the schematics as reference