This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS62745: configuration

Part Number: TPS62745

Hi Team,

We have designed TPS62745 chip as per data sheet , all VSEL1 to 4 lines connected to VOUT Line. When I used  TI ‘WEBENCH design tool‘ found all VSEL 1to 4 lines connected to VIN. PG is open in datasheet application ckt , WEBENCH tool it is connected to pullup resistor . Please confirm which configuration is correct?

As per Datasheet 


WEBENCH ® Design Report