• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 206 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65988DJEVM: Part # and FTDI issues

Roy Wheaton
Prodigy 55 points
Part Number: TPS65988DJEVM
Other Parts Discussed in Thread: TPS65988DJ

Hi, I have two questions.

1. The chip on my eval board has a a suffix of DJ and that option does not appear in the part selection menu of the configuration tool Only DH and DK.

2. I cannot connect to the eval board via FTDI.

Exception Encountered during I2C Address Sweep:No FTDI I2C channels (I2C_GetNumChannels) detected, exiting....

<type 'exceptions.Exception'>

Traceback (most recent call last):

File "dialogWindow.pyc", line 11041, in sweep_handler

File "hw_interface.pyc", line 186, in hw_open

Exception

  • 0
    TI__Genius 16740 points

    Hello Roy,

    Roy Wheaton said:
    1. The chip on my eval board has a a suffix of DJ and that option does not appear in the part selection menu of the configuration tool Only DH and DK.

    The TPS65988DJ is used for thunderbolt and requires a thunderbolt reference design.

    Is your final design going to be a thunderbolt design? 

    Roy Wheaton said:
    2. I cannot connect to the eval board via FTDI

    The TPS65988DJ EVM has a TIVA not a FTDI.

    Best Regards,

    Christian.