This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ78350-DEVICE-FW: Data Flash Summary Table for the R2 and R3 firmware

Part Number: BQ78350-DEVICE-FW
Other Parts Discussed in Thread: BQ78350-R1A, BQSTUDIO

Hi Sir,

The document "BQ78350-R1A Technical Reference" indicates that the Cell Balance Threshold's address is 0x460D. However, our testing of the firmware for R2 reveals that the address has changed to 0x4640, and for R3 firmware, we found the address to be 0x4634. Could you please provide the Data Flash Summary Table for the R2 and R3 firmware? 

Our MCU reads the values from the Data Flash Summary Table, and we need to ensure that we are reading the values from the correct addresses.

  • Hello,

    The technical reference manual does not have the most upgraded memory addressing.

    If you have access to BQStudio, you should be able to see the proper addressing by going to Window-> Preferences -> All Global Settings -> Show Advacnced Views-> Apply -> Ok

    Then navigate to Data Memory and it should display the addresses of each register.

    Jose Couso