• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 74 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMR54410: Electrical load CC and CR mode

Ivy Jin
Expert 3075 points
Part Number: LMR54410

Hi team,

My customer uses an electronic load test LMR54410 and they wonder why the electrical load in CC mode does not drop to 0A when the power is turned on and the induced current falls to 0A when in CR mode? 

What model do you usually recommend for testing? Thanks!

CC mode: Vout=5V, Iout=1A

CR mode: Vout=5V, 5ohm

Schematic:

Regards,

Ivy

  • +1
    TI__Genius 10900 points

    Hi Ivy,

    CC mode will directly add a 1A current to the load end, so there is already 1A at the load end during the startup process. We generally use this mode to measure. The waveforms of the two modes should be consistent in steady state. Thanks.

    Aurora