• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 62 subscribers
  • Views 284 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS62843: line/load regulation

Given Ding
Expert 8545 points
Part Number: TPS62843

Hi Team, 

below are several questions. 

1. is there line regulation accuracy on Vout? 

2. is there load regulation accuracy on Vout?

3. in datasheet, there is load transient test, what's the slew rate of load change, 1A/us? 

Thanks.

BRs

Given

  • +1
    TI__Guru*** 145970 points

    Hi Given,

    You can see the line and load regulation examples in figures 9-7 and 9-8.

    For the load transient, the slew rate is usually around 1A/usec.

    Did your customer have a specific requirement or concern?

    Chris

  • 0 in reply to Chris Glaser
    TI__Expert 8545 points

    Hi Chris, 

    customer hope to meet 0-200mA/3us, Vout drop below 50mV. from the test waveform, I think we can meet it. 

    load / line regulation is +/-1.5%. 

    BTW, could Vout accuracy @ PFM ( 10mA or 1mA) meet +/-2.5%? Thanks. 

    BRs

    Given 

  • +1 in reply to Given Ding
    TI__Guru*** 145970 points

    Yes, that is a slow step which the device should be able to meet based on figure 9-18.  When they test it, see if the 0 mA starting load is really 0.000mA or if it is 100uA or something non-0.  The light load can make a big difference in the transient response.

    We don't specify the accuracy in PFM, but the PWM accuracy is 1.5% over the full temperature range.  And looking at figures 9-7 and 9-8, the additional inaccuracy at 1 mA and 10 mA loads is very small.

    Chris