This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ20Z45-R1_BQEASY-SW: BQ20z45 - Update status in learn cycle

Part Number: BQ20Z45-R1

HI

I'm trying to go through a package training cycle.

After turning on the QEN and going through the discharge and charge cycle,

the Update status has set to 06 and does not want to go to the 0E state.

The discharge was done with a current of C/5 and also C/10 with the same effect.

I'm sending a chip file for analysis

bq20z45 1.04.gg.zip

I don't know where I went wrong.

Regards,

Pawel Czezyk