• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 112 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CSD18541F5: Nominal Leakage Current

Aarogya Pandey
Prodigy 140 points
Part Number: CSD18541F5

Datasheet did not specify the nominal leakage current (Igss) for CSD18541F5. Could someone provide this value or direct me towards where I can find the average Igss in the simulation file on TINA?

  • 0
    TI__Mastermind 32965 points

    Hello Aarogya,

    Thanks for the inquiry. TI does not spec a nominal value for leakage current (IGSS or IDSS) in any of our FET datasheets. We only publish a maximum guaranteed value tested at the datasheet conditions. If you contact me via regular email, I can give you a better idea of the typical value from characterization data collected during product development.

    Best Regards,

    John Wallace

    TI FET Applications