This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi TIs,
Orignal , I have design-in with LMZ10501, but i got parts with change information from our purchase and change to LMZ20501.
So , i have some question , the LMZ20501 and LMZ10501 have Radiated EMI report?
My environment:
VIN input voltage : 3.3V
Vout voltage : 1.1V
Mode input : Pull-low with Auto mode.
Note: have simulation software can share, i can show the report to our customer
Thank you
Rai.
Hi Rai,
We have no radiated EMI measurements for the LMZ20501 and LMZ10501.
Are the boards already been built? TPSM828303 is one of our newer low EMI module and we have EMI data for this part.
Best regards,
Varun
Hi John,
Good day.
Yes, The LMZ20501 and LMZ10501 already design-in with our project. the phase will into MP stage.
Because, i change LMZ10501 to LMZ20501, so our customer need the official report to check.
No problem in actual use.
Thank you.
Regards,
Rai
Hi Rai,
Thanks for the info. Unfortunately we don't have any radiated EMI data for those two devices.
Best regards,
Varun