Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
TPS53626: Jitter specification of TPS53626, TPS51225 and TPS51219
I can answer to TPS53526. You'll have to talk to SR-MVB about the other two, but I suspect its a similar answer.
Jitter is not a controlled spec, nor is it very important on DCAP+ devices. DCAP+ is a constant on time architecture, so the frequency will vary with load conditions.
