Hi,
Would you please help review below schematic? thanks!
Jeff
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Jeff,
I will check this and will inform you early next week.
Best Regards,
Arush
Hi Jeff,
I checked your schematic. I found that you are not using resistor divider at the EN/UVLO pin. 9V at EN pin will violate the absolute maximum.
Does "OVP_24V CUT" mean that you want to keep OVLO at 24V? Current value of OVLO is 13.8V. You need to change R348 to around 52.63K for 24V OVP.
Best Regards,
Arush