Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 138 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65983B: PD config GUI

Chang Fei Yee1
Prodigy 55 points
Part Number: TPS65983B
Other Parts Discussed in Thread: TPS65987, TPS65982BB

Hi TI,

I am biulding a prototype with Thunderbolt3 JHL7440 and PD controller TPS65983B. I am adopting Intel's Tapex Creek reference design, but customizing it as a single UFP, without host charging.

I was granted access to My Secure Resource with PD config tool installer "windows_64bit_TPS65987_88_THUNDERBOLT_application_customization_5.24.exe".

However, upon creating new project with this tool, the GUI does not list down all the supported PD controller models. In the setup wizard, when I selected using non-default Tapex Creek design, it pointed me to choose if using TPS65982BB as external billboard.

Hence, I would like to seek confirmation from TI, if "windows_64bit_TPS65987_88_THUNDERBOLT_application_customization_5.24.exe" supports TPS65983B?

Thanks.