This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS1641: output current limit MIN/MAX @ 250mA

Part Number: TPS1641
Other Parts Discussed in Thread: TPS2660

Hi TI support,

I found the TPS1641 and I realy like it.

For my design I need a more precise answer than the 3 lines in table 7.5 with Rlim=332kOhm, 10kOhm and 5,49 kOhm. I see the accuracy is not the same with different resistors, but is it perhaps like the figure 24 in TPS2660 datasheet?

I will use Rlim = 40 kOhm to get Ilim = 250mA. But what are the MIN and MAX values?

Thank you very much!

Best regards

Markus

  • Hi Markus,

    We don't have any curve similar to figure 24 (from TPS2660) in datasheet of TPS1641 and using the curve from TPS2660 datasheet won't give you correct value of range, but the trend will remain similar. For 1A we have 6% variation and for 250mA, the variation will be higher.

    By simple interpolation between the cases provided in datasheet, we get around 18%-20% variation for 250mA ILIM which is worst case scenario.

    Best regards,

    Arush

  • Hi Markus,

    I hope I was able to solve your problem.

    Do you have any question regarding this. I will close this thread if you don't have any other questions.

    Best Regards,

    Arush