Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 110 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ27Z561-R2: GPCRB and accuracy test question

Kailun Liu
Intellectual 1798 points
Part Number: BQ27Z561-R2
Other Parts Discussed in Thread: GPCRB

Hi team,

1. According to the guidance on the official website, I need to collect VIT data before doing GPCRB. is there any requirement for the srec file to be used at this time? Was it before or after Golden Learning?

2. Are there any differences between:

1.Download gg_out and chemdat12_ID to original srec file, and then doing golden learning.

2.Doing golden learning first and then download the gg_out and chemdat12_ID

3. Is there a requirement for the current to calculate the RSOC accuracy?

  • 0
    TI__Mastermind 18111 points

    Hello Kailun, 

    1. The tool requires the gg file not the srec file. The gg file you upload needs to have the default chemID you are trying to use. 

    2. Once you download the gg_out and chemdat12_ID files you do not need to do the golden learning. 

    3. No, as long as the gauge is in discharge mode so that it is coulomb counting, that is all that you would need. 

    Regards, 

    Jonny.