Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 102 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5141-Q1: LM5141-Q1

Anu Shetty
Prodigy 40 points
Part Number: LM5141-Q1

I came across this IStep (transient step load current) which is 4A. is IStep assumed value or is there any caluclation involved to get this value as 4Amp.

if any calculations involved please let me know.

Thank you.

  • 0
    TI__Guru 60497 points

    Hi Anu,

    4A is the load step in this particular example. You can adjust the parameters as needed for your particular use case.

    Note we also have PSPICE simulation models available to check load transient response. Also, I can send you a SIMPLIS model if needed.

    Regards,

    Tim