Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 239 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

UCD3138CC64EVM-030: PMBus message in UCD3xxx device GUI

UCD3138CC64EVM-030: TI Fusion Digital Power Designer doesn't see device

BatMan
Expert 1172 points
Part Number: UCD3138CC64EVM-030
Other Parts Discussed in Thread: UCD3138

Hello,

I am trying to connect the TI Fusion Digital Power Designer 7.10.1 to  a UCD3138CC64EVM-030

I have a TI USB Adapter connected.

I have 3.3V power to the UCD3138 EVM (through the 12V external power connection) indicated by the green led.

When the app is booted it scans and finds the device with the following message:

------------

The following devices are no longer supported by Fusion Digital Power Designer v7.10.1:

        * Address 88d: UCD3100ISO1

Please use FUSION-DIGITAL_POWER_STUDIO of contact TI sales rep for correct GUI.

-------------------

Should I install FUSION-DIGITAL_POWER_STUDIO instead? or where can I get the GUI.

-Tim