This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS61170: Designing negative voltage with charge pump

Part Number: TPS61170
Other Parts Discussed in Thread: TPS61085

Hi team,

I am designing a 9V->+-14V power supply.

Iout is both 100mA.

I read on TPS61085 9.3.2 TFT LCD Application Circuit that charge pump can be added for the negative rail.

However, the Vout for the negative is not simulated properly.

Can you point out what im doing wrong?

Top line is negative Vout, second is positive Vout.