BQ76952: GPC upload error

kimS

Part Number: BQ76952

Hi expert.

I don't know why error message reported.

Problem with thermistor.txt file.
Number of temperatures listed does not match number of resitances.
Also make sure to leave one blank line between resistances and temperatures
and no other blank lines in the file.

Coeff NTC_LNFK103.zip Coeff NTC_LNFK103-report.zip

over 1 year ago

+1 Arelis Guerrero over 1 year ago

TI__Expert 5645 points

Hi Kim,

Looking at your input file, you need to remove the trailing spaces on top of the file and only have a single space in between the last resistance value and the "# Temperature (degrees C)", then re-run the tools. The file has to be formatted exactly as spec on the "Guide to Thermistor Coefficient Calculator Tool" https://www.ti.com/lit/ug/sluucp2/sluucp2.pdf

You can refer to this FAQ for additional instructions https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1227867/faq-bq76952-how-to-configure-the-temperature-model-of-bq769x2-using-the-thermistor-coefficient-calculator-tool

Regards,

Arelis G.Guerrero

Power management

Power management forum

BQ76952: GPC upload error