Other Parts Discussed in Thread: USB2ANY, TPS55288
Hellow
I got TPS5528EVM-045 from web site.
I can't operate EVM.
I configured Vin conditon 10V according to the manual, but Vout didn't out put.
The jumper pins and others condition of EVM is as shown in the picture below.
Please puport how to opreate this EVM and what is wrong my setting.
After setting Vin to 10V, I monitored voltage wave form betwen jp7 to GND by oscilloscope, but no switching waveforms were observed.
best regards.
