New lot incoming was put on hold at IQC due to mismatch MSL,
The spec sheet called out MSL 1 but incoming lot its original label present MSL 2
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
New lot incoming was put on hold at IQC due to mismatch MSL,
The spec sheet called out MSL 1 but incoming lot its original label present MSL 2
Hello Thamarong,
Thanks for reaching out to us.
We are looking into this topic and will get back to you latest on Friday.
Best regards,
Excel
Hello Thamarong,
The MSL rating of this device was changed from MSL 2 to MSL 1 last October 25, 2023. And based on the LOT #, the parts were produced before the MSL rating changed was implemented, so it still has MSL 2 rating.
This change is covered by PCN: 20231004002 (see attached figure for reference).
I hope my response address your queries.
Best regards,
Excel
Hello Thamarong,
I'm closing the thread now as I already your query. You can re-open it by just adding a comment below.
Thank you.
Best regards,
Excel