Hi team,
My customer have question about bode plot for phase margin.
They inject 50~100Ohm in following red block and measure by network analyzer.
Does this measurement work well?
Regards,
Youhei MIYAOKA
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
My customer have question about bode plot for phase margin.
They inject 50~100Ohm in following red block and measure by network analyzer.
Does this measurement work well?
Regards,
Youhei MIYAOKA
Hi Youhei,
Thank you for using E2E forums, regarding your query yes this red block or resistor should be fine and should work.
In the LM5123-EVM if you look we have a similar resistor placement at this pin.
Hope this helps
BR,
Haroon