Hi team,
Is there a register in UCD that can be used to reinitiate the power cycle?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
Is there a register in UCD that can be used to reinitiate the power cycle?
Hi Yihe,
Thank you for your response. However, on writing into the aforementioned register, the rails are not turning back on even though their On Dependencies are being met.
We believe this is because each rail in our system has multiple On and Off dependencies. (The dependencies are imposed to make the system failproof in case of a short circuit event).
We want to re-sequence the rails with a “Time between Re-sequence” of 1s. We request your assistance regarding the same and if possible, we request for a brief call to debug the issue. Please find the .tifsp file attached.
UCD_R1_0.zip
Thanks and Regards,
Varshini BS