This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS25982: paste mask

Part Number: TPS25982

HI, the question is not related to the reflow phase but on the PCB layout.

In the component datasheet you have this figure as a layout example

There is no thermal relief on the pad. Do you recommend NOT to use the thermal reliefs?



  • Hi Franco,

    On the top side, VIN plane gives the thermal relief. Additionally, we recommend to use copper plane on the bottom side as thermal relief.

    Please refer layout images in the EVM user guide.

    Best regards,