• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 175 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TPS25982: soldering guideline

TPS25982: paste mask

Franco Piccirelli
Prodigy 110 points
Part Number: TPS25982

HI, the question is not related to the reflow phase but on the PCB layout.

In the component datasheet you have this figure as a layout example

There is no thermal relief on the pad. Do you recommend NOT to use the thermal reliefs?

Thanks

Franco