This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ79616-Q1: Resolution for cell HW protector DACs apparently wrong in datasheet.

Part Number: BQ79616-Q1
Other Parts Discussed in Thread: BQ79616


please confirm that the datasheet SLUSE81C is wrong in stating that:

  • V_LSB_DIAG = 152.59 uV/LSB shall be used for "all the HW protector DAC"

on page 15.

I only get correct readings when I use the VCELL resolution (190.73) for the voltage protector DACs (OV_DAC, UV_DAC and VCBDONE_DAC).

For the temperature ones, it does not matter since LSB for DIAG and GPIO are the same.

Best regards