Other Parts Discussed in Thread: UCC28730
Hello,
We have a concern about creepage at UCC28730-Q1 device.
We have detected that in our design, we will have up to 510Vrms between HV pin and DRV pin.
We need to ensure that the creepage distance between these pins is enough for our design (1.94mm).
So, please:
1. Can you indicate the material group of the UCC28730-Q1? By this, according IEC60664-1, we will define properly our creepage required.
2. Do you have some lesson learned about this issue?
3. Can you indicate us some recommendations?
Thanks!
Magí Margalef